CAR BODY

The search for the continuous improvement of the company production process and the constant research of raw materials have led to the production of a wide range of products for the maintenance and repair of the bodywork. Each product is designed to guarantee the right solution to every problem.

STUCCHI

 

SIDERPLAST
Standard putty

The metallic putty for bodywork. It is used for grouting work on car bodies. This product is ideal for metal surface restoration work. Siderplast Standard has excellent adhesion and can be sanded with abrasive paper after treatment.

SIDERPLAST

EASY30

The two-component putty SIDERPLAST EASY30 is a new formulation that satisfies the requirements of maximum sandability and adhesion, while maintaining a low specific weight. Softness, fast drying and very high sanding allow for simple and perfect application, speeding up production rates. The high adhesive capacity allows it to be used on bare sheets, new sheets and galvanized sheets. The
low specific weight, high thixotropy and excellent sandability allow repairs, even large ones, to be carried out with a minimum quantity of product, guaranteeing a very high yield.
SIDERPLAST EASY30 is a light putty and can be used where it is necessary to keep the weight of the substrate unaltered: fiberglass, wood etc.

SIDERPLAST

​SID 40

SIDERPLAST SID 40 is a metal putty for bodywork ideal for filling metal sheets. Its particular feature is its extraordinary flexibility during processing, extremely easy to sand with excellent adhesion to the substrate.

SIDERPLAST

C4122

The 4122 two-component putty is the latest formulation of ILPA ADESIVI. Unparalleled softness and creaminess allow a simple and perfect application of the product, while rapid drying speeds up production rates. Furthermore, it is also applicable at high temperatures, for example 60 ° C, without any dripping.

The characteristics of the hardened product are excellent: the high adhesive capacity allows it to be used on bare sheets, new sheets and galvanized sheets; good elasticity and excellent sandability guarantee the final result. Neutral color.

SIDERPLAST

Alluminio 

This product is highly tenacious and resistant, retaining extraordinary characteristics of trowelability and sandability. SIDERPLAST ALUMINUM is used on aluminum bodies and for the reconstruction of missing body parts. This product retains an innovative formulation which makes it suitable to be threaded and perforated and also to replace some welds.

SIDERPLAST

CAP80

SIDERPLAST CAP80 is one of the best-products in the stucco line. Thanks to its softness and creaminess, it makes its application simply perfect. Furthermore, the drying of SIDERPLAST CAP80 is extremely quick to speed up production rates. The final result is guaranteed by the excellent adhesive capacity and its sandability.

SIDERPLAST

Glass fiber

SIDERPLAST Fiberglass is the right product indicated for repairs and grouting of large gaps and for the restoration of missing parts of the bodywork. It can be used in the grouting of fiberglass parts such as: tanks, boats and plastic bumpers.

SIDERPLAST

Nitro putty

SIDERPLAST Stucco Nitro has been formulated for all those works on metal sheet, applicable with a trowel, with excellent adhesion and sandability. After the treatment it is possible to paint it with any type of product.

TRANSPARENT

 

MAX TRANSPARENT

HS

MAX TRASPARENTE HS is a two-component high-thickness transparent paint, specific for the finishing of any metal surface. Its characteristic is characterized by the brilliance of the final effect and its adjustable drying thanks to the 4 types of catalysts (slow, normal, rapid, espresso). It does not yellow over time.

MAX TRANSPARENT

LOW VOC

MAX TRASPARENTE LOW VOC is a two-component, high-thickness, transparent varnish suitable for all types of finishing works on metal surfaces. The MAX transparent varnish is ideal for pastel, metallic or pearl colors, it can be combined with water-based systems.

MAX TRANSPARENT

MATT ACRYLIC

MAX TRASPARENTE LOW VOC is a two-component, high-thickness, transparent varnish suitable for all types of finishing works on metal surfaces. The MAX transparent varnish is ideal for pastel, metallic or pearl colors, it can be combined with water-based systems.

MAX FUND

POLYESTER

MAX FONDO POLYESTER, with two components, is used for the total or partial refurbishment of industrial vehicles and cars. Its characteristic is its perfect flow and its excellent adhesion on the various substrates, possessing good properties as anti-rust.

MAX FUND

NITRO

MAX FONDO NITRO, single-component, based on nitrocellulose, is a primer formulated for all bodywork works such as: total or partial painting and retouching and can be applied on fillers, bare sheets, new sheet metal and old paint. Thanks to its content, the product can also be used as an insulating base or filler.

MAX FUND

2K POLYURETHANE ACRYLIC
LOW VOC

Low VOC, two-component, solvent-based acrylic polyurethane primer. It is formulated for all bodywork work
(total and partial painting and retouching), applicable on polyester and epoxy fillers and primers, bare metal sheets, new and old paint sheets, galvanized sheets. By varying the dilution percentages, it can be used as an insulating or filler primer; it has high hiding power, easy application and excellent sandability.

SEALANTS

 

MAX

ANTI-STONE

MAX ANTISASSO is a soundproofing protective coating. Its characteristic is the protection against abrasion from stone chips and an "anticorrosive" function. It is the right product for bodies, side bands, interiors, spoilers and luggage. It can be perfectly repainted without enamel absorption. Furthermore, MAX ANTISASSO protects against humidity by resisting thermal shocks.

MAX

BRUSH SEALANT
M123

MAX BRUSH SEALANT is the right product ideal for sealing bonnets, mudguards, front bezels, etc. It dries completely by air or oven, excellent resistance to thermal shocks and atmospheric agents. It can be perfectly painted over without any type of enamel absorption.

POLISHING

 

MAX

CLEAN

MAX CLEAN is the universal car cleaner suitable for professional use and do-it-yourself. Ideal for deep cleaning of all types of bodywork, without damaging the surfaces. It does not compromise the gloss of the paint. Its use is also indicated on rims, tires and plastic parts. Just dilute it in water and it will be the ideal cleaner for cars, motorcycles and buses.

VELVE

ABRASIVE PASTE

VELVET ABRASIVE PASTE is ideal for removing small scratches and stains from all types of body paint. It is also recommended to remove the opacity from the painted car or to finish the car before delivery. Also available in versinoe in water.

MAX

POLISH

MAX POLISH is the first choice stabilized wax emulsion designed to guarantee the best results in the professional and do-it-yourself field. Max Polish is designed to give us an unparalleled gloss of any type, in addition, it protects the treated part from atmospheric agents and smog, thus ensuring a water-repellent effect. Available in water and abrasive version.

MAX

GLOSS

MAX GLOSS is the renovator for plastic parts, which regenerates bumpers, fascias, exterior mirrors, thus restoring the original color and protecting the treated parts from smog, water and dust. It is also used on motorcycle cases, dinghies and suitcases. MAX GLOSS forms a film that restores the original appearance of scratched and worn plastic parts.

MAX

AUTO CREAM

MAX CREMA AUTO is the right product that gives shine and protection to the treated surfaces. It does not contain abrasive agents, so as not to scratch the surfaces; Its particular formulation is free from agnets and therefore does not give off odors when opening the jar and when applying the product.

MAX NEW LIGHT

RENEW HEADLIGHTS

MNL is the product for repairing headlights and all polycarbonate materials scratched and / or worn and yellowed by time. Restores the original protective film giving very high UV protection without alternating resistance. MAX NEW LIGHT allows you to repair the damaged part without any need for specific equipment; Ideal for professional use but also for do-it-yourself.

THINNERS

 

NITRO THINNER

It is a specific diluent to obtain the dilution of the Nitro system.

DILUENT

ANTISILICONIC

It is an anti-silicone washing thinner, suitable for cleaning and degreasing silicone-polluted body parts.

DILUENT

ACRYLIC

Ideal for cleaning primers, enamels and acrylic clearcoats. It is used for correct dilution in order to have a perfect distension. Also available in the versions: slow, normal and fast.

SK200

SK200 is a complete kitt for fiberglass and plastic reconstruction of missing parts, made of polyester resin, with its hardener in paste, the fiberglass fabric and a mixing cup.

ILPA Adesivi Srl - P.IVA 00465900728​

​Via G. Ferorelli 4 – Z.I, 70132 Bari, Italia​

 

TEL. +39 080 538 3837

FAX. +39 080 537 7807

segreteria@ilpa.it

Termini e Condizioni.  Privacy Policy. Farmed by Webidoo

R.E.A. n. 152397

Reg. Imp. Bari n.00465900728

Cap. Soc. € 218.400,00 i.v.